|
|
|
PICO 4
|
|
|
| |
Characteristics
|
- 4 voice polyphonic or monophonic
- 2 digital oscillators (saw, sine and trapezoidal)
- low frequency oscillator (LFO) for FM, pulse width, filter sweep and amplitude
- portamento in monophonic mode
- 2 envolope (ADSR e AR)
- low pass digital filter with ressonance control
- 12 read only pads memories
- 24 user programmed memories, accessed through MIDI SYSEX
- 4 quick selection buttons for pads
- configuration for pitch bend extension and keyboard strategy
- parameters can be controlled through MIDI messages
- tabletop, 240 x 120 x 50 mm, standard half rack, optional adapter for controller
|
|
technical specifications
|
item |
description |
synthesis |
Modeled analog through DDS (Direct Digital Synthesis)
implemented by DSP (Digital Signal Processor) |
Sample Frequency |
34.5 KHz |
Resolution |
12 bits |
Frequency stability |
+/- 100 ppm (parts per million), 0.01 % per Celsius
degree of temperature variation |
Signal noise ratio |
Better than 70 dB |
Waveforms |
Sawtooth, sine and trapezoidal with pulse width control |
Filter |
2 pole (12 dB/octave) digital, IIR (Infinite Impulse
Response) with resonance control, bandwith 20 Hz to 15 KHz |
Oscillators |
2 DDS, tune +/- 15 semitons and +/- 7 1/8 of halftone |
Envelopes |
AR for filter. Attack and release time from 5 miliseconds to 10 seconds.
ADSR for amplifier. Attack, decay and release time from 5 miliseconds to 10 seconds. |
LFO |
DDS, senoidal, 0.1 Hz to 160 Hz |
Memories |
12 ROM pad memories
24 programables pad memories, that can be loaded and saved from MIDI SYSEX |
MIDI Input / Output |
Conectors DIN 5 pins 180 degrees,
MIDI IN, MIDI THRU and MIDI OUT |
Output |
P10 connector, signal 2.2 Vpp 0.775 VRMS 0 dBu max,
1 KOhms impedance |
Size |
240 x 120 x 50 mm |
Power source |
J4 connector, external source, 9 a 12V CC at 500 mA,
any polarity |
Consumption |
2 W |
Weight |
Aproximately 1 Kg |
Note: Specifications subject to change without notice |
|
|
|